PRV-0414 PC104 Double Height Adapter (for tall PCB components)
- REQUEST A QUOTE
|Header||10-Pin Power Header (Dual Row 0.100 inch)|
|Bus||16-Bit PC/104 (ISA) bus|
|Extras||Set of 8 Nylon Board Stand-offs (with Nuts and Screws)|
|Other Features||Standard PC/104 Mounting Holes; Spacer PCB|
|PRV-0414-08||PRV-0414, PC/104 Double Height Adapter, RoHS|
The PRV-0509 is a PC/104 Fan Card designed to help cool embedded PC/104 systems and remove dangerous hot spots, even in completely enclosed applications. In most cases, it is placed between a CPU...
5-Port PC/104 10/100 Fast Ethernet Switch, Unmanaged The Parvus PRV-1059 is a rugged VLAN-capable 5-port PC/104 Fast Ethernet switch featuring very low power consumption and highly...
PRV-1220 is a low-cost, CompactFlash® to IDE adapter flexibly designed with both 40-pin (0.10") and 44-pin (2mm) IDE connectors. Fully compatible with Type I and Type II cards, the adapter enables...
PC/104-Plus & PCI/104-Express 100W / 50W Isolated DC/DC MIL-STD-1275/704 Power Supplies The PWR-21-11 and PWR-22-11 boards are rugged MIL-STD-1275/704 compliant DC/DC converter cards in...
The Parvus SWI-22-10 is a rugged Commercial Off the Shelf (COTS) Gigabit Ethernet switch card optimized for size, weight and power (SWaP) sensitive embedded military and civilian computer network...
The PRV-0414 PC/104 Double Height Adapter is a low-cost interconnection board that gives embedded PC/104 computer systems a method for connecting circuit board modules taller than the prescribed PC/104 specification height. The adapter is especially useful for high-profile PC/104 CPU, power supply and hard drive modules that incorporate onboard fans or heatsinks for thermal management, as these types of boards commonly exceed the PC/104 form factor height of 0.60" and take up two card slots. Overcoming PC/104 height infringement can also be especially useful during prototype development when placing a prototype card at the end of a card stack becomes impractical.
Measuring only 3.550" x 0.550" in size, the PC/104 Double Height Adapter provides clearance for tall board components in a card stack, while offering a 16-bit pass-through header for all standard PC/104 bus signals and a 10-pin power connector for power/grounding through the PC/104 bus. The adapter also has standard PC/104 board mounting holes and can be placed on top or bottom of any PC/104 module with its 104-pin and socket connector.
Included with the adapter is also a set of nylon stand-off spacers for board mounting and a second, smaller (3.550" x 0.40") circuit board used to maintain proper spacing on the other side of the PC/104 slot. Stand-offs can be inserted into mounting holes for the adapter and adjacent PC/104 modules, or alternatively, the PC/104 card stack can be securely mounted in a PC/104 railed card cage without any standoffs required.
Contact our sales team today to learn more about our products and services.
Our support team can help answer your questions - contact us today.