Curtiss-Wright provides a range of ground station hardware and software. These products have specifically combined critical functions to optimize data acquisition and analysis for the most stringent test range mission. The telemetry ground station products work with other Curtiss-Wright products to offer an end-to-end solution from sensor to processed data. Our advanced real-time/post-processing analysis software completes the solution with a host of time-saving features. Please get in touch with us for more information on any custom ground station solution you require.

IADS Data Processing, Delivery and Archiving Software

IADS Data Processing, Delivery and Archiving Software

The IADS Server supports a wide range of data source interfaces and can serve hundreds of concurrent client connections. More>

GS Works Real-time and post-test data visualization and analysis software

GS Works (Now IADS RT Station)

GS Works was based on IADS visualization and analysis technology. In April 2020, we were very happy to have IADS become a part of Curtiss-Wright and in an effort to enhance the efficiency of the service we provide, GS Works will be replaced effective from the next planned maintenance upgrade with a product named IADS RT Station. More>

  • Interactive interface which allows custom data displays, parameter definitions, analysis options and test setup
  • Runs on Microsoft Windows PC platform and Commercial Off-The-Shelf networks
  • Exports to CSV, Microsoft Excel and MathWorks MATLAB
  • Walk-away media - full data set
  • XidML compatible (versions 2.41 and 3.0)
RMSR-2002-PS Rack-Mounted Fibre Channel Data Playback

TTC RMSR-2002-PS Rack-Mounted Fibre Channel Data Playback

The TTC RMSR-2002-PS Rack-Mounted Fibre Channel Data Playback unit houses two data cartridges. More>

  • Data Playback
  • Integrates two media storage bays
  • Uses digital recording format
  • IRIG Chapter 10 interface compatible
  • Rackmount chassis for ground support
TTC DBS-140U USB 2.0 - 40 Mbps PCM Bit Sync/Decom/Simulator

TTC DBS-140U USB 2.0 - 40 Mbps PCM Bit Sync/Decom/Simulator

RCVR-210-S Multimode (SOQPSK + PCM) Telemetry Receiver/Demodulator

TTC RCVR-210-S Multimode (SOQPSK + PCM) Telemetry Receiver/Demodulator

GTS/BAY/001 Desktop 5.25 inch DRE/SSD/00x harness

GTS/BAY/001 Desktop 5.25 inch DRE/SSD/00x harness

The GTS/BAY/001 interfaces from the DRE/SSD/00x (SATA storage media) to the PC motherboard via e-SATA to SATA and power cable interface. More>

  • 5.25 inch front load format
  • Securing latch
  • Light-weight, rugged, nylon housing
GTS/BSC/003 Bit synchronizer PCI board (20 Mbps) - 1 channel

GTS/BSC/003 Bit Synchronizer PCI board (20 Mbps) - 1 channel

The GTS/BSC/003 reconstructs a serial PCM data stream from a source that has been corrupted by noise, phase jitter, or base line variations. More>

  • Bit error rate performance within 1 dB of theory
  • Bit-rates up to 20 Mbps (NRZ-L codes)
GTS/BSC/004 Smart Source Selector PCI board (20 Mbps) - 2 channels

GTS/BSC/004 Smart Source Selector PCI board (20 Mbps) - 2 channels

The GTS/BSC/004 reconstructs a serial PCM data stream from a source that's been corrupted by amplitude modulation, phase jitter or base line variations. More>

  • Bit Synchronizer
    • Bit error rate performance within 1 dB of theory
    • Bit-rates up to 20 Mbps (NRZ-L codes)
  • Smart Source Selector
    • Uses signal quality estimates to weigh input signals
    • Yields performance gain of up to 3 dB when all channels are used
GTS/BSC/005 Bit synchronizer PCI board (20 Mbps) - 2 channels

GTS/BSC/005 Bit Synchronizer PCI board (20 Mbps) - 2 channels

The all-digital design utilizes two independent, programmable matched filters and Phase Locked Loops (PLLs) to track deviations in the bit-rate. More>

  • Bit error rate performance within 1dB of theory
  • Bit-rates up to 20 Mbps (NRZ-L codes)
GTS/BSC/006 Smart Source Selector PCI board (20 Mbps) - 3 channels

GTS/BSC/006 Smart Source Selector PCI board (20 Mbps) - 3 channels

Features include a bit synchronizer, with a bit error rate performance within 1dB of theory, and a Smart Source Selector that aligns over 350 bits. More>

  • Bit synchronizer
    • Bit error rate performance within 1 dB of theory
    • Bit-rates up to 20 Mbps (NRZ-L codes)
  • Smart Source Selector
    • Uses signal quality estimates to weigh input signals
    • Yields performance gain of up to 4.7 dB when all channels are used
GTS/DEC/003 Bit synchronizer and PCM decommutator PCI board (20 Mbps) - 1 channel

GTS/DEC/003 Bit Synchronizer and PCM Decommutator PCI board (20 Mbps) - 1 channel

The GTS/DEC/003 reconstructs a serial PCM data stream from a source that has been corrupted by noise, phase jitter or amplitude modulation. More>

  • Bit synchronizer
  • PCM decommutator
  • Loopback tester
GTS/DEC/004 Smart Source Selector and PCM decommutator PCI board (20 Mbps) - 2 channels

GTS/DEC/004 Smart Source Selector and PCM decommutator PCI board (20 Mbps) - 2 channels

GTS/DEC/004 reconstructs a serial PCM data stream from a source that has been corrupted by noise, phase jitter or amplitude modulation. More>

  • Bit synchronizer
  • Smart Source Selector
  • PCM decommutator
  • Loopback tester
GTS/DEC/005 Bit synchronizer and PCM decommutator PCI board (20 Mbps) - 2 channels

GTS/DEC/005 Bit Synchronizer and PCM Decommutator PCI board (20 Mbps) - 2 channels

GTS/DEC/005 reconstructs a serial PCM data stream from a source that has been corrupted by noise, phase jitter or amplitude modulation. More>

  • Bit synchronizer
  • PCM decommutator
  • Loopback tester
GTS/DEC/006 Smart Source Selector and PCM decommutator PCI board (20 Mbps) - 3 channels

GTS/DEC/006 Smart Source Selector and PCM Decommutator PCI board (20 Mbps) - 3 channels

The GTS/DEC/006 reconstructs a serial PCM data stream from a source that has been corrupted by noise, phase jitter or amplitude modulation. More>

  • Bit synchronizer
  • Smart Source Selector - performance gain of up to 4.7 dB when all channels are used
  • PCM decommutator
  • Loopback tester
SAM/DEC/008 Ethernet based USB powered PCM decommutator

SAM/DEC/008 Ethernet based USB powered PCM decommutator

The SAM/DEC/008 decommutates PCM streams and provides a programming link for Acra KAM-500 systems using a single USB 2.0 connection in the ground station PC. More>

  • IRIG-106 Ch. 4 compliant PCM decommutator
  • USB 2.0 Type II compatible, no additional power source required
  • 1 Mbps programming link to Acra KAM-500 systems over X-PROG
  • Choice of three PCM codes BIØ-L, NRZ-L or RNRZ-L-15
  • Choice of RS-422 or TTL inputs
GTS/FSC/003 PCM decommutator PCI board (20 Mbps) - 1 channel

GTS/FSC/003 PCM Decommutator PCI board (20 Mbps) - 1 channel

The GTS/FSC/003 is a single-channel PCM decommutator. Each minor frame can be tagged with time from an IRIG-B source to an accuracy of 1 µs. More>

  • PCM decommutator
  • Loopback tester
GTS/FSC/005 PCM decommutator PCI board (20 Mbps) - 2 channels

GTS/FSC/005 PCM Decommutator PCI board (20 Mbps) - 2 channels

The GTS/FSC/005 is a two-channel PCM decommutator, and each minor frame can be tagged with time from an IRIG-B source to an accuracy of 1 µs. More>

  • PCM decommutator
  • Loopback tester
GTS/RCV/001 14 Mbps L/S band receiver PCI card with 12 IF filters

GTS/RCV/001 14 Mbps L/S band receiver PCI card with 12 IF filters

The GTS/RCV/001 is a single-slot, full-length PCI FM receiver. The wideband design supports PCM data rates up to 14 Mbps. More>

  • Single-slot PCI receiver with FM demodulation
  • AM and linear AGC outputs
  • Supports data rates up to 14 Mbps
  • 8 dB noise figure (max.); 5 dB (typ.)
  • 70 MHz IF output from down-converter and 70 MHz IF input to IF receiver
  • 20 MHz reference I/O for use with GTS/DIV/001
TTC DVC-401M-SA 1-Channel MPEG-4 Video and Audio Decoder in Stand-Alone Box

TTC DVC-401M-SA 1-Channel MPEG-4 Video and Audio Decoder in Stand-Alone Box

The TTC DVC-401M-SA is a 1-channel output board for use in stand-alone box. The board can regenerate one channel of MPEG-4 decoded video and stereo audio. More>

  • Stand-alone MPEG-4 Video and audio decoder
  • Regenerates one channel of Compressed MPEG-4 Video and Audio
  • Fully compatible with the CVC-401M and MCVC-401M Video Compression products
MARM-2000 Airborne Multiplexer Unit

TTC MARM-2000 and RMOR-2000D Multiplexor / Demultiplexor

MARM-2000 Airborne Multiplexer Unit and RMOR-2000D Ground-Station Demultiplexer Unit for acquiring and reproducing PCM and video streams in real-time. More>

  • MARM-2000 acquires multiple asynchronous PCM and video data stream input channels for transmission as a single PCM stream channel
  • RMOR-2000D ground-station demux unit to reproduce in real time all PCM and video streams transmitted by the MARM-2000 unit
Ground Station Cables Standard cables used for GTS-500 system assembly

Ground Station Cables Standard for GTS-500 system

The connectors and cables are designed to mate with standard GTS-500 products. Allows easy access to common signals used in bench testing. More>

  • Allows easy access to common signals used in bench testing and most applications

Product Finder

Connect With Curtiss-Wright Connect With Curtiss-Wright Connect With Curtiss-Wright
Sales

CONTACT SALES

Contact our sales team today to learn more about our products and services.

YOUR LOCATION

PRODUCT INFORMATION

Support

GET SUPPORT

Our support team can help answer your questions - contact us today.

REQUEST TYPE

SELECT BY

SELECT Topic